Login Panel
Search
Key Word(s):


Search By:   

    

Share this Page
Add this page to your Google or Yahoo bookmarks. Send it by e-mail, AIM, SMS or add to your Blog, Digg, and just about everything else.

AFX RacingSlot-itCarrera Slot CarsCincy SlotsFly Car ModelBRM Model CarsThird Eye Technology132SlotCar.usFantasy World HobbiesMainline HobbiesHotSlots132.comNiagara Hobby & Craft MartElectric DreamsSCI StoreScaleracing LLCCarlson Sensor TrackMini GridRace Haven Hobbies
Home  >>  News

NSR News January

Published: January 20, 2010

NSR News January

 

Ford P68

NSR is glad to announce it's third classic car, the P68.

All pics of the P68s are PROTOTYPE ONLY

Body rear is white tampoed, insert are red, spinners are "chromed" and many more nice details will be on the final production model.

 

Bodyshell:
The "Modellistic" attitude with high attention to details is an aspect which we consider to be fundamental and this has been fully adhered to, in fact the bodyshell is made in 2 separate part for better look. Inside the cockpit there is a four pieces driver, the steering wheel, gear shift, motor and other small pieces. The body is fixed to the chassis by way of two screws at the front and one screw at rear.
Body dimensions are 62.5 mm width, 142.5mm length, and 28 mm high.
The wheelbase is 70.5mm and the distance from center of rear axle to center guide is 86.0mm.
The weight of the fully accessoried and painted bodyshell it is 18 g. whilst the weight of the RTR car it is 69g.

Decoration:
The first livery version of the NSR P68 reproduces the 1000Km Nurburgring 1968 version, red n.7. Second livery will be “British limited edition”, made for English fans but it will be on the market in all the orld. Third livery will be red n.9.

Chassis:
The main chassis is nylon made “flat” design of 1 to 1,5 mm. thickness for maximum grip when cornering whilst capable to withstand crashes. Sidewinder motor support is held in position to main chassis by three screws (one in front and two at the side) which are only crossing it to screw into an independent ring. This allows the motor support to move independently from the chassis and in the desired amount (which can be set by simply unscrewing the screws from underneath). The motor is of a sidewinder configuration with two degrees from the rear axle. The chassis comes with a removable traction magnet, located just ahead of the motor; the neodymium magnet is round, 4mm high and 8mm diameter with two different mounting positions. The guide is counter-sunk well inside the chassis to allow desired ground clearance by the use of thin spacers to be placed in between the guide itself and the chassis. The one piece front axle can move vertically Rear pillow block height, allows the gear to protrude only 1mm under the chassis level thus leaving still 1 mm. gear/track clearance.

Pick-up Guide:
The guide is similar to that of current offerings, but it is low-profile (only 1mm thickness); exclusive adjustable height using .005” , .010" or .020” new spacers, to cater for racing on all types of plastic tracks, as well as wooden tracks with raised, flush or recessed braid/copper tape to optimise the braids contact. The pivoting shaft is 8mm. high for a free vertical movement. The brass connectors used to fix the wires to the guide are newly made, slightly bigger, chosen to guarantee a tough contact with our smallest thickness braids.

Mechanical:
The components of NSR P68 are made up of the usual high-quality from NSR:
NSR3004 20K Shark motor, 20000rpm 164gr-cm
NSR4801 precision and very strong 49mm x 3/32" diameter axles
NSR5001 aluminium 16mm. diameter ‘front - NO air system’ 4/40 set screw front wheels,
NSR5002 aluminium 16 mm. diameter 'Air System' 4/40 set-screw rear wheels,
NSR5250 ‘No-friction’ hard front rubbers 18.5 x 9mm specifically made for P68.
NSR5253 ”Supergrip' rear softer rubbers, 20.5 x 10mm specifically made for P68.
NSR4803 Autolubricant & no-friction oilites
NSR6911 Extralight & no-friction 11t pinion
NSR6032 Extralight & no-friction 32t black gear 17.5mm

Motor:
The motor for the NSR FORD MK IV is the Shark 20K, fully developed by triple World Champion Salvatore Noviello, made always by the same NSR philosophy: to realize high performance product without compromises! Shark 20K motor has 20000 RPM at 12Volts with an excellent torque value of 164 gr/cm, an exceptional value, previously obtained only from “long can” and heavy motors.
The motor can is opened from both sides, it has cooling oval holes and the magnets are ceramics.
A famous Spanish magazine after a comparative test has described the NSR motor superior to any other motor challenge.

Policy:
‘Ready to Run’ is not enough!
NSR's objective is to make a Classic car using modern technology, so high tech ‘Ready To Race’. It needed to be competitive straight out the box, without any fiddling or modifications required to make it perform properly and we believe that this third car has also achieved this target. Our policy is to offer really a ‘Ready To Win’ car; we never like that people need to buy aluminium wheels to replace plastic wheels, soft rubbers to replace hard rubbers, or a motor to replace slow box stock motor…! The NSR P68 is an innovative model with high tech components, highly performing on track still respecting the scale modellistic aspect.

The NSR P68 was created in the streamline of the Mosler GT project which has dominated in the GT top class either in National and International competitions since it was born in 2006. In according with our NSR philosophy, we have worked to obtain the best performances without any compromise. The NSR “Classic” model cars are without doubts the fastest in the world.

Manufacture:
Manufacturing costs and artisan labor in Italy are however significantly higher than China or East Europe, but NSR is very proud of the fact that all the models are completely and entirely built in Italy, thus allowing NSR to have absolute control over quality and to demonstrate our Country capability. All NSR P68 cars are assembled and tested exclusively into NSR Factory and only by NSR employers, so NSR can offer full warranty about final product. Retail price will be in proportion to the quality of product.

 

British Limited Edition P68

 

 

Updated Ford MK IV

NSR has definitely made some positive changes to the entire body of their Ford MK IV. The Gold number 3 and the Dark Blue number 4 are the updated versions.

 

Upcoming Release Dates

This is our plan for Jan-Feb-Mar. No delay in delivery date.
Please place pre-order so we can know priority and quantity to work.

   

NSR COMING CARS

 

date

code

 

retail

Ready

1013W

RENAULT CLIO CUP      BODY KIT ALL COLOURS SW Shark 22K

   59,50

Ready

1016W

RENAULT CLIO RALLY  BODY KIT ALL COLOURS AW KingEVO21K

   59,50

Ready

1035W

RENAULT CLIO RALLY  BODY KIT ALL COLOURS IL KingEVO21K

   59,50

30 Jan

1046

P68 Alan Mann Nurburgring 1967 n.7 red              SW Shark 20K

   75,00

30 Jan

1041

FORD MK IV new version n.4 Blue (LAST BATCH!!!!)

   75,00

30 Jan

1033

PORSCHE 917K body kit clear SW Shark 20K

   59,50

30 Jan

1023

FORD MK IV body kit clear SW Shark 20K (new body version)

   59,50

Feb

1049

ABARTH 500 Assetto Corse Presentation grey        SW Shark 20K

   75,00

Feb

1050

P68 Alan Mann                   body clear kit              SW Shark 20K

   59,50

Feb

1043AW

ABARTH S2000 Prototipo body kit clear AW KING EVO 21K

   59,50

Feb

1043IL

ABARTH S2000 Prototipo body kit clear IL KING EVO 21K

   59,50

March

1047AW

MOSLER MT900R EVO2 Lowered  MOMO British GT black  AW King Evo 21K

   69,50

March

1042

ABARTH 500 Assetto Corse Presentation red        SW Shark 20K

   75,00

March

1044

FORD MK IV new version     Le Mans 1967 n.3 bronze

   75,00

 

IMPORTANT NOTES!!!
- ALL pricing is in Euros
- ALL tampoed Renault Clio have REDUCED RETAIL PRICE 49,50eur
- ALL Cars in KIT VERSION have REDUCED RETAIL PRICE 59,50eur

 

 



Discuss this article in the Forum!