Login Panel
Search
Key Word(s):


Search By:   

    

Share this Page
Add this page to your Google or Yahoo bookmarks. Send it by e-mail, AIM, SMS or add to your Blog, Digg, and just about everything else.

AFX RacingSlot-itCarrera Slot CarsCincy SlotsFly Car ModelBRM Model CarsThird Eye Technology132SlotCar.usFantasy World HobbiesMainline HobbiesHotSlots132.comNiagara Hobby & Craft MartElectric DreamsSCI StoreScaleracing LLCCarlson Sensor TrackMini GridRace Haven Hobbies
Home  >>  News

NSR News October

Published: October 26, 2010

NSR News October

 

NSR Porsche 997

 

Bodyshell:
The "Modellistic" attitude with high attention to details is an aspect which we consider to be fundamental and this has been fully adhered to, by special stamping process to realize the complete bodyshell in one piece still maintaining the true scale to the real car. The body is injection-moulded plastic, fully detailed with clear plastic windows and injection-moulded plastic detailed interior. Inside the cockpit there is a four pieces driver, steering wheel, gear shift, fire extinguisher, roll-bar.

The body is fixed to the chassis by way of three screws, two at the front and one at the rear. It lies on top of the chassis, wheel arches clearance is 2mm.

 

We have 2 version: Rally and GT; body difference is only co-driver and book.

Body dimensions are 62.5 mm. width, 136 mm. lenght, 36 mm. high.
The wheelbase is 73 mm. and the distance from center of rear axle to center guide is 92 mm.
The weight of the fully accessoried and painted bodyshell it is 18g. for GT version and 20g. for Rally version whilst the weight of the RTR car it is 80g. for GT version and 82g. for Rally version.

 

Decorations:
The first 2 livery versions of the Porsche 997 Rally are

1063 Porsche 997 Rally Test Car Red

 

1064 Porsche 997 Rally Test Car White

 

Third livery will be 1061 Porsche 997 “Rally Portugal 2008” It will be on the market December 2010 or January 2011

The first 4 livery versions of the Porsche 997 RSR are

  •  
    • 1067 Porsche 997 RSR Slotlandia Yellow Limited Edition
    • 1068 Porsche 997 RSR Slotlandia Red Limited Edition
    • 1069 Porsche 997 RSR Slotlandia Pink Limited Edition
    • 1070 Porsche 997 RSR Slotlandia Green Limited Edition

Next Porsche 997 RSR versions will be on the market in 2011 year.

1074 Porsche 997 RSR Renè Rast
1075 Porsche 997 RSR Nick Tandy

Chassis:
NSR introduces completely new high-tech chassis and new anglewinder motor support with some solutions for best performance on all kind of tracks:

The chassis is completely new, it is nylon made “flat” design of 1 to 1,5 mm. thickness for maximum grip when cornering whilst capable to withstand crashes.

The one piece front axle can move vertically and there are 4 x 4/40 screws for front axle ground clearance adjustments to suit any different track surface.

As innovative concept there is a “V” shaped drop arm 64 mm. long which by meaning of two screws can be fixed rigidly at a required height (from 0 to 4 mm. ground clearance with an M2 x 6mm. screw positioned in the forehead hole) to the main frame chassis or either be set for a certain free drop (with an M2 x 8/10 mm. screw in the other hole). Further more you can install a spring (like the ones used for the chassis suspension system) to enforce the “drop” effect.

Anglewinder motor support is totally new! We have optimised all of the fixed dimensions so much to grant the possibility to produce narrower cars. The side screw pods are now closer to the centre and specifically are symmetric to guaranty the best car balance. The sideway movements it has also being reduced by different support profile.

New triangular design; motor support is held in position to main chassis –according to our usual construction philosophy- by three screws (one in front and two at the side) which are only crossing it to screw into an independent ring. This allows the motor support to move independently from the chassis and in the desired amount (which can be set by simply unscrewing the screws from underneath). The motor is of an anglewinder configuration now reduced from 19 to 15 degrees only, from the rear axle! This is a new record!

There are new standard plastic cups and new cups for suspension springs. The motor weight is now exactly “balanced” with 50% on both sides of the chassis. It means that performance is better than previous motor supports.

The chassis comes with a removable traction magnet, located just ahead of the motor; the neodymium magnet is round, 4mm high and 8mm diameter with 3 different mounting positions. The guide is counter-sunk well inside the drop arm guide to allow desired ground clearance by the use of thin spacers to be placed in between the guide itself and the drop arm. Rear pillow block height allows the gear to protrude only 0.5mm under the chassis level thus leaving 1.5 mm. gear/track clearance.

Pick-Up Guide:
The guide is similar to that of current offerings, but it is low-profile (only 1mm thickness); exclusive adjustable height using .005” , .010" or .020” new spacers, to cater for racing on all types of plastic tracks, as well as wooden tracks with raised, flush or recessed braid/copper tape to optimise the braids contact. The pivoting shaft is 8mm. high for a free vertical movement (12mm for rally version). The brass connectors used to fix the wires to the guide are newly made, slightly bigger, chosen to guarantee a tough contact with our smallest thickness braids.

Mechanical:
The components of NSR PORSCHE 997 are made up of the usual high-quality from NSR:

NSR1375 Medium black chassis
NSR1234 Guide drop arm 64mm Xhard violet
NSR1237 Triangular Anglewinder motor support Xhard violet
NSR3017 King EVO 21k long can motor, 21400rpm 322gr-cm
NSR4802 precision and very strong 54mm x 3/32" diameter axles
NSR5003 aluminium 17mm. diameter ‘front - NO air system’ 4/40 set screw front wheels
NSR5004 aluminium 17 mm. diameter 'Air System' 4/40 set-screw rear wheels (5003 Rally version)
NSR5226 ‘No-friction’ hard front rubbers 18 x 8mm
NSR5206 ”Supergrip' rear softer rubbers, 19 x 10mm
NSR4803 Autolubricant & no-friction oilites
NSR7114 Extralight & no-friction 14t pinion
NSR6531 Extralight & no-friction 31t red Anglewinder gear
NSR4843 Low friction racing pickup guide (4842 Rally version)

Motor:
The motor for the Porsche 997 is the King EVO 21K, fully developed by triple World Champion Salvatore Noviello, made always by the same NSR philosophy: to realize high performance product without compromises! King EVO 21K motor has 21400 RPM at 12Volts with an excellent torque value of 322 gr/cm. The motor can is opened from both sides, it has cooling oval holes and the magnets are ceramics.

Policy:
‘Ready to Run’ is not enough!
NSR's objective is to make a car using modern technology, so high tech ‘Ready To Race’. It needed to be competitive straight out the box, without any fiddling or modifications required to make it perform properly and we believe that this third car has also achieved this target. Our policy is to offer really a ‘Ready To Win’ car; we never like that people need to buy aluminium wheels to replace plastic wheels, soft rubbers to replace hard rubbers, or a motor to replace slow box stock motor…!

The NSR PORSCHE 997 although it is a completely innovative mechanical project, it benefit the experience we accumulated since the Mosler GT project which has dominated in the GT top class either in National and International competitions since it was born in 2006, and we believe it will start a new era where performances will be pushed even further.

Manufacturing costs and artisan labor in Italy are however significantly higher than China or East Europe, but NSR is very proud of the fact that all the models are completely and entirely built in Italy, thus allowing NSR to have absolute control over quality and to demonstrate our Country capability. All NSR PORSCHE 997 cars are assembled and tested exclusively into NSR Factory and only by NSR employers, so NSR can offer full warranty about final product. Retail price will be in proportion to the quality of product.

 

Ready to Ship Now!!!

1063 Porsche 997
Rally Test Car Red 69,50eur

1063 Porsche 997
Rally Test Car White 69,50eur

 

1062 Porsche 997 Rally body kit white 59,50eur

 



Discuss this article in the Forum!