Announcement

Collapse
No announcement yet.

SCX Pro Motor Fit in Standard 42b Pod?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • SCX Pro Motor Fit in Standard 42b Pod?

    Does the SCX pro motor fit in the standard rx 42b pod?

  • #2
    I think I did this a while back, if I remember you need to swap the bulkheads. The Pro motor doesn't have the 'fingers' that contact the copper rails on the 42b chassis. The Pro uses eyelets from the bulkhead so the wires run directly into the guide.

    Comment


    • #3
      They are the same size; but you need to solder wires to the motor- no "tabs" to the copper strips in the chassis.

      Comment

      Working...
      X