Announcement

Collapse
No announcement yet.

front end grubb screws

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • front end grubb screws

    Hey, I have a Racer Ganassi with all Slot.it parts and the front axle grubb screws apperently are two different sizes. The top grubb are 0.035(my wrench size that fits) and the bottom must be .095 Has anyone encountered this before? I thought the top screws are the same as the bottom but clearly the bottom is smalller? I posted on Racer sight but since it is Slot.It parts I post here too!! Any help??
    Tom

  • #2
    If it's 1.3mm it's not Slot.it parts.

    As far as I know Slot.it has only ever used .95mm grub screws. So not sure these parts could be Slot.it.
    Alan Smith
    SCI Owner.
    www.scaleracing.com
    www.slotcarillustrated.com
    www.facebook.com/scaleracingcenter
    www.132slotcar.us

    1-253-255-1807

    Comment


    • #3
      Alan you are correct. But AFAIK, that's also true of Racer.

      Comment


      • #4
        I thought so as well

        I may have misunderstood the allen size he is using not sure what 0.95mm is in thousandths. I think 0.95mm equals 38 thousandth
        Alan Smith
        SCI Owner.
        www.scaleracing.com
        www.slotcarillustrated.com
        www.facebook.com/scaleracingcenter
        www.132slotcar.us

        1-253-255-1807

        Comment


        • #5
          Thank You so much for responding!!
          Tom

          Comment

          Working...
          X