No announcement yet.

RamJet-X Cable Comparison

  • Filter
  • Time
  • Show
Clear All
new posts

  • RamJet-X Cable Comparison

    The RamJet-X controller is available with either the standard or extended length connection cable. How long are they? Let's take a look.

    This is a standard unit:

    This one has the optional long cable:

    Here they are in shown in relation to a stock Carrera wired controller:

    How far will they reach? For test purposes, I plugged the controllers into the base and measured how far I could raise each controller before the tension of the cable began to lift the base.

    Stock Carrera (it's an older Pro-X model, newer ones might be longer) went about 3'. A stock SCXD controller is similar.
    RamJet-X standard length, about 7'.
    RamJet-X optional long cable, about 10'.

    For tracks set up at table height, the standard length is good. For tracks on the floor, the optional long cable might be preferred.
    Last edited by Earthbound; 11-03-2013, 12:55 AM.