Announcement

Collapse
No announcement yet.

Lotus 40 chassis

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Lotus 40 chassis

    Anyone have any suggestions for a good aftermarket chassis for the Lotus 40?

    Thanks in advance!

  • #2
    First of all, the body sits very low and a sidewinder would be the best bet to set up if you are including any amount of interior. The HRS2 has been a scratch builder's go-to chassis since it was created and stills handles the best right out of the box. That is where I would start.

    Comment


    • #3
      Morse, The HRS and HRS11 chassis are 1/32 scale, and the Lotus 40 (TSR06) is 1/24, as I am sure you are aware........A parma Flexi, JK, or other stamped 1/24 chassis will work, but a "Retro" D3 chassis or chassis kit, (many variations available online) will work even better.

      Cheers
      Chris Walker

      Comment

      Working...
      X