No announcement yet.

Carrera Black Box power

  • Filter
  • Time
  • Show
Clear All
new posts

  • Carrera Black Box power

    There is current running through my Carrera BB despite the Power switch being in the off position. Anyone know why this would be and how to rectify it? Thanks

    Last edited by heylicky; 03-31-2018, 11:40 PM.

  • #2
    Depends on where you are testing for power. If you're testing before the switch then everything is fine. On/off switches are easy to replace; mind you I've never replaced on on a BB or CU, but it shouldn't be that difficult. And if it's just the switch you can always unplug the power supply. You should upgrade to the CU anyway, just my .02 cents.


    • #3
      carlos; that reading is the wires from the board to the track.

      I may have damaged the mosfet while poking around with the soldering iron not knowing what I'm doing. I've ordered some more and will see what happens when its replaced