Announcement

Collapse
No announcement yet.

Pinion twisters race announcement

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • SHAMONG
    started a topic Pinion twisters race announcement

    Pinion twisters race announcement

    PINION TWISTERS RACE ANNOUCEMENT FOR : (ONLY QUICK SLICKS OR SUPER TIRES ALLOWWED)
    10/6/18 NINCO GT JAWS 17K MOTOR, FLY TRUCKS NA RULES JAWS 17K MOTOR
    Pinion Twisters, 243 South Pavilion Avenue, Riverside NJ. Track opens 10 am for practice, and shuts down 12 noon for tech inspection. Racing starts at 1 pm.

    NINCO GT
    CARS: ANY NINCO GT CAR WITH OR WITHOUT POD ( LIGHTNING VERSION ALLOWED)
    MOTOR
    : JAWS 17K MOTOR
    CHASSIS: WITH OR WITHOUT POD ( LIGHTNING VERSION ALLOWED)
    BODY:
    MAY REMOVE FLASH TO ALLOW FOR PROPER BODY FLOAT.
    INTERIOR:
    STOCK NO MODIFICATIONS
    WHEELS:
    ANY MANUFACTURE
    TIRES:
    ANY MANUFACTURE
    GUIDE:
    ANY NINCO
    WIRE:
    MAY CHANGE LEAD WIRE TO ANY MANUFACTURE .
    AXLES:
    ANY MANUFACTURE
    GEARS:
    ANY MANUFACTURE
    SCREWS:
    ANY MANUFACTURE
    BUSHINGS:
    ANY MANUFACTURE
    WEIGHT: ANY MANUFACTURE INSIDE CAR ONLY


    FLY TRUCKS NA RULES JAWS 17K MOTOR

    http://www.slotcarillustrated.com/po...13&postcount=1


    11/4/18 SLOT.IT DTM BOX STOCK, Pinion Twisters, 243 South Pavilion Avenue, Riverside NJ. Track opens 10 am for practice, and shuts down 12 noon for tech inspection. Racing starts at 1 pm.
    CARS: SLOT.IT OPEL, ALFA ROMEO
    MOTOR
    : STOCK
    CHASSIS: STOCK (INLINE CONFIGURATION ONLY 0.5 MM CH110 POD
    ) MAY REMOVE FLASH FOR PROPER BODY FLOAT
    BODY:
    MAY REMOVE FLASH TO ALLOW FOR PROPER BODY FLOAT. MAY TAPPER BODY POST TO ALLOW FOR FLOAT
    INTERIOR:
    STOCK NO MODIFICATIONS
    WHEELS:
    STOCK
    TIRES:
    STOCK FRONTS (MAY TRUE ONLY TO MAKE TIRE EVEN NOT A RUBBER BAND) AND ANY MANUFACTURE REAR SILICONE
    GUIDE:
    STOCK (MAY CHANGE BRAID TO ANY MANUFACTURE BUT GUIDE MUST REMAIN STOCK)
    WIRE:
    MAY CHANGE LEAD WIRE TO ANY MANUFACTURE .
    AXLES:
    STOCK
    GEARS:
    STOCK
    SCREWS:
    ANY MANUFACTURE
    BUSHINGS:
    STOCK
    WEIGHT: ANY MANUFACTURE INSIDE CAR ONLY



    MULTI-MANUFACTURE GT 22K LIMIT ON MOTOR
    Multi-manufacture GT
    CARS: 1997- present gt1, gt2, gt3 cars allowed
    MOTOR: Any readily available motor up to 22,000 rpm (avant slot mag motor "blue" not allowed or any motor similar to the down force of such motor, NO DOODOO MOTORS)sidewinder, inline or anglewinder configurations are allowed.
    motor tabs may not be damaged in anyway
    GUIDE BLADE: any manufacture guide blade.May not solder lead wire to braid on guide flag
    WIRE: any manufacture lead wire
    SILICONE TIRES: any manufacture silicone tire
    WHEEL INSERTS: any manufacture wheels with inserts
    MOTOR POD: any manufacture motor pod
    BUSHINGS AND BEARINGS: any manufacture ball bearings and or bushings are allowed
    GEARS: any manufacture gears and gear ratio
    CHASIS:any readily available 3D chassis. Scalextric PCR chassis may also be used. No modofications allowed to the body or chassis. Chassis maybe sanded but only to remove burrs from chassis mold
    INTERIOR: any manufacture lexan interior allowed.
    WEIGHT: lead weight allowed inside car only
    .040 clearance to tech block




    12/15/18 FLY CLASSIC ( ANY FLY CLASSIC/ FLYSLOT/GB TRACK FOLLOWING NA RULES) SIDEWAYS GRP 5 FOLLOWING NATIONAL RULES.
    Pinion Twisters, 243 South Pavilion Avenue, Riverside NJ. Track opens 10 am for practice, and shuts down 12 noon for tech inspection. Racing starts at 1 pm.
    ANY FLY CLASSIC/ FLYSLOT/GB TRACK FOLLOWING NA RULES
    http://www.slotcarillustrated.com/po...81&postcount=1

    SIDEWAYS GRP 5 FOLLOWING NATIONAL RULES
    http://www.slotcarillustrated.com/po...79&postcount=1



    MORE INFORMATION TO FOLLOW PLEASE MARK THE DATE ON YOUR CALENDER
    Post questions here, or contact:
    Don J (856-264-5872)
    Last edited by SHAMONG; 10-02-2018, 09:00 AM.

  • SHAMONG
    replied
    Race has been canceled to allow the running of the Sideways Lamborghini and Scalextric BTCC regional qualifier at Pinion Twisters. Race will be posted for another date and time.

    Leave a comment:


  • SHAMONG
    replied
    Race reminder pinion twister 10/6/18

    PINION TWISTERS RACE ANNOUCEMENT FOR : (ONLY QUICK SLICKS OR SUPER TIRES ALLOWWED)
    10/6/18 NINCO GT JAWS 17K MOTOR, FLY TRUCKS NA RULES JAWS 17K MOTOR
    Pinion Twisters, 243 South Pavilion Avenue, Riverside NJ. Track opens 10 am for practice, and shuts down 12 noon for tech inspection. Racing starts at 1 pm.

    NINCO GT
    CARS: ANY NINCO GT CAR WITH OR WITHOUT POD ( LIGHTNING VERSION ALLOWED)
    MOTOR
    : JAWS 17K MOTOR
    CHASSIS: WITH OR WITHOUT POD ( LIGHTNING VERSION ALLOWED)
    BODY:
    MAY REMOVE FLASH TO ALLOW FOR PROPER BODY FLOAT.
    INTERIOR:
    STOCK NO MODIFICATIONS
    WHEELS:
    ANY MANUFACTURE
    TIRES:
    ANY MANUFACTURE
    GUIDE:
    ANY NINCO
    WIRE:
    MAY CHANGE LEAD WIRE TO ANY MANUFACTURE .
    AXLES:
    ANY MANUFACTURE
    GEARS:
    ANY MANUFACTURE
    SCREWS:
    ANY MANUFACTURE
    BUSHINGS:
    ANY MANUFACTURE
    WEIGHT: ANY MANUFACTURE INSIDE CAR ONLY


    FLY TRUCKS NA RULES JAWS 17K MOTOR

    http://www.slotcarillustrated.com/po...13&postcount=1

    Leave a comment:

Working...
X