Announcement

Collapse
No announcement yet.

Photo-etched parts

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Photo-etched parts

    Do I attach the photo-etched parts before or after i apply the clear coat?

  • #2
    Depends on the parts. I would attach small emblems before and grilles after the clear coat.

    Homer

    Comment


    • #3
      If you are careful, you can spray a small area with clear coat and then put the p.e. bit on while it is still wet. As long as the p.e. bit is not in an area easily rubbed off or a structural part, I use clear paint all the time to attach these bits. No worries about the usual hassles with super glue. When the initial application has dried and the part is in place, you can mist on another coat or two of clear without worrying about the part flying off.

      Scott

      Comment

      Working...
      X