Announcement

Collapse
No announcement yet.

Chassis Work

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • chappy
    started a topic Chassis Work

    Chassis Work

    While reading Bill's Model Murdering he made mention of my Cobramite restoration project, so I thought I would share it here.

    I received a bare Cobramite Chassis from a fellow Brass builder, and I needed to recreate the plastic pieces. So I took some liberties and did a redesign as well as worked on the fitment of the components. Here is a pictorial of the build:

    Here are the original parts:


    Here is my take:


    Side by side:


    Finished build top:


    Finished build bottom:


    The hubs, axles, and wipers were also parts that were machined for this project. I ended up doing three builds altogether. The wipers are held in place by a snap feature of the top block. The wipers themselves are stamped out of a sheet of bronze. They are modeled after the Tyco Pro wiper.

    Thanks for looking,

    Chappy
    Last edited by chappy; 01-09-2017, 10:40 AM. Reason: spelling

  • Old - Mech.
    replied
    Real nice work,Chappy! I can remember the days brass cars like this were,well more common.
    People liked building scratchbuilt H.O. just the way the bigger scale guys did.

    Leave a comment:


  • Slotbob
    replied
    Jewelry.

    Am not sure if you should race it or put it on a gold chain & wear it around your neck.

    Maybe both.

    Leave a comment:


  • munter
    replied
    Very nice and I am not an HO guy.

    Leave a comment:

Working...
X