Announcement

Collapse
No announcement yet.

East coast nationals at race-wear

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • East coast nationals at race-wear

    We will be holding another East coast national race in Oct.
    Alan which weekend can you attend?

    The 2 possible dates are Oct. 4,5,6,&7 or Oct. 11,12,13,&14

    We will have the following races (Order to be determined):
    Race 1. Manufacturers challange race to include GT/LMP cars by Slot.it, Avant, Scale Auto, and Arrow
    Race 2. Slot.it group C
    Race 3. BRM Race (Sprint)
    Race 4. BRM Megain Race (Sprint)
    Race 5. Scale Auto (Sprint)
    Race 6. BRM Race (Endurance)
    Race 7. Scale Auto (Endurance)

    Endurance races will be a minimum of 2 man teams.
    Costs and times to be announced.
    Other events may be added.
    Lets make this a premier event.

    All interested please post on here.
    Last edited by race-wear; 07-24-2012, 11:31 PM.

  • #2
    im interested

    Comment


    • #3
      That's one

      Need many more

      Comment


      • #4
        You Got 2.

        Comment


        • #5
          very likely

          Depending on the final dates, I'm likely. Our club's series gets started in October but those dates haven't been finalized yet, either.

          I'd only be running the Manufacturer Challenge and Slot It classes.

          Comment


          • #6
            schedule

            Sounds good, Lets try and put you on the Schedule here for next year.

            Ricky

            Comment


            • #7
              East coast Plastic Track National Final at Race Wear.

              The 6th Annual National Final is in New Jersey Sept 7th -9th. However many race on plastic track so I have decided to also hold a National Final for those track systems.

              Race Wear will be the first track to hold the Plastic Track portion of the National Finals.

              So the race coming up at Race Wear will be the 6th Annual ( Plastic Track ) National Final.

              We will hold the same races as the Wood Track Final, Sprints and Endurance. Plus subject to entry a Megane Sprint ( IROC ) and BRM and Scaleauto 1/24 scale Sprints.

              I spoke with Ricky yesterday and it is planned to be October 18th - 21st.

              Once we have finalised everything we will post this up on the Front-page of SCI and in the News section.
              Last edited by Scaleracing; 08-08-2012, 07:29 AM.
              Alan Smith
              SCI Owner.
              www.scaleracing.com
              www.slotcarillustrated.com
              www.facebook.com/scaleracingcenter
              www.132slotcar.us

              1-253-255-1807

              Comment


              • #8
                October race

                Hi Alan and Ricky,
                I plan to be there for the October races. Try to confirm the date so that I can ask for time off from work. Also, I assume we will run by the same rules as in NJ. I noticed that Ricky has the 2011 rules for slot.it which are very different than the 2012 slot.it rules. Which year are we going by for slot.it?~Ron

                Comment


                • #9
                  The dates for this race will be Oct. 18, 19, 20, & 21. All the races will be run using the 2012 rules.
                  A final schedule for each race will be set soon.

                  Ricky

                  Comment


                  • #10
                    Make sure you are looking at the correct version of the Rules.

                    Slot.it Group C 2012
                    http://www.slotcarillustrated.com/po...0&d=1344036875

                    Rule on tires mentions SC2007 this is not the tire we would normally spec for Group C that is SC-2009.

                    Scaleracing Manufacturers Challenge 2012
                    http://www.slotcarillustrated.com/po...1&d=1344036875

                    BRM Challenge 2012
                    http://www.slotcarillustrated.com/po...2&d=1344036875

                    Scaleauto 1/24th 2012
                    http://www.slotcarillustrated.com/po...3&d=1344036875

                    These are the latest rules with amendments as needed.

                    Please note when editing the rules for Slot.it Group C I wrote as a potential wheel/tire SC-2007, this is not correct we use SC-2009 for Group C. SC-2007 is the tire for the Manufacturers Challenge.

                    In Slot.it Group C it is not required to have rear inserts with the Scaleauto wheels, same in Manufacturers Challenge.

                    BRM and Scaleauto 1/24th scale must have wheel inserts.

                    UPDATE Sept 21st 2012, BRM will run without inserts as the wheels we are using will not take the insert. Scaleauto will run with insert.
                    Slot.it (on the rear) and Manufacturers Challenge without inserts also.
                    To help keep this Final running on time we will not be using hand out motors and tires rather you will supply your car into tech with the correct motor ( inc gear ratio in BRM and Scaleauto ) and tires. Please see announcement regarding this change.

                    Hopefully this will allow the Event to run smoothly and on time.
                    Last edited by Scaleracing; 09-21-2012, 08:54 AM.
                    Alan Smith
                    SCI Owner.
                    www.scaleracing.com
                    www.slotcarillustrated.com
                    www.facebook.com/scaleracingcenter
                    www.132slotcar.us

                    1-253-255-1807

                    Comment


                    • #11
                      Hi Alan,
                      So it sounds like we will use SC-2009 foam tires for the Slot.it race, not the rubber tires?
                      Also, I'm confused about if this is inline only? It says we need to use an inline pod but mentions under chassis that you can use an anglewinder chassis? Please clarify.~Ron

                      Comment


                      • #12
                        You will be using Scaleauto tires for every Class.

                        On the Slot.it Group C rules:

                        Slot.it has made in line only chassis as well as chassis that are capable of being in line or angle-winder both are allowed in the in line configuration only in Group C. Either standard or 1/2 off set pods are allowed as the latest cars come that way ( 1/2 off set )

                        Now in the Manufacturers Challenge any chassis is allowed, from the said Manufacturer, But cars have to run in the configuration they were released in. So a Radical for example cannot be angle-winder this may change next year.

                        Slot.it can run a McLaren angle winder or in-line as they have been sold both ways RAW Cars are angle winder other releases till the Lola were in-line.
                        Alan Smith
                        SCI Owner.
                        www.scaleracing.com
                        www.slotcarillustrated.com
                        www.facebook.com/scaleracingcenter
                        www.132slotcar.us

                        1-253-255-1807

                        Comment


                        • #13
                          Scale racing plastic track nationals

                          Details for this event are almost finalized and should be up in the News and Reviews in the next day or so. If you have any questions, please ask.

                          At first glance it may appear expensive but read what you will be getting. 9 Races, all with trophies and a overall winner trophy for the event. We will also have food available for the event.

                          For out of townees, there is a Days inn about 5 miles away that everyone says is reasonable and several have stayed there in the past. The phone number is 410-761-8300. The web says rates starting at 74.99 but call, they have other deals as well. There is a Hampton Inn across the street as well. The number is 410-761-7666 and rates are a little more. There are also hotels around the airport and Arundel Mills, about 15 minutes away. We could make arrangements for transportation to these 2 if needed.

                          Hope to see you at the races.

                          Ricky
                          Last edited by Scaleracing; 09-21-2012, 08:33 AM.

                          Comment


                          • #14
                            Ian, we will miss you.

                            Originally posted by Zillimon View Post
                            im interested
                            As many of you already know, Ian will not be at this event so you all have a chance to race for 1st instead of 2nd place this year. This will be our 1st major event without Ian.

                            For those that do not know, Ian has joined the Marines and got called to boot camp in Florida earlier than originally told. We wish him well there and all at Race-Wear are proud of this young man. He has been racing here with his dad since he was about 12, Has worked here and always helps with customers if we are busy.

                            Good luck and God Bless

                            Comment


                            • #15
                              Scaleracing National Final 2012 for plastic tracks.

                              Scaleracing (Plastic Track) National Finals 2012


                              October 18, 19, 20, 21, 2012


                              Race-Wear


                              7900 Ritchie Hwy.


                              Glen Burnie, MD. 21061


                              443-790-3606


                              To allow a schedule to be maintained and help to reduce the cost, it has been decided to allow everyone to use their own motor and tires. The tires must look good and show all original markings to identify them as the spec tire. If they are not, you will be asked to purchase and change them. In most classes spec gear and motor will also be used. They will be announced in each category below. If the motor appears to be tampered with, you will be asked to purchase and change the motor and re-present to tech. If you are not sure, please ask Alan prior to tech. If he approves it, then he will mark it and allow it.

                              The top 5 cars in each class will be impounded and the top 3 dyno'd to determine if the engine was tampered with. If it falls outside of the announced (on race day) range, you will be disqualified.

                              With this many races, it is important to stay on schedule. Please be prepared and on time for each event. There will be no refunds if you fail to be on time or fail tech and cannot be ready on time. Alan will be available on Thursday and Friday during the day to help you with your cars if needed. Please do not wait until Tech as this will only delay the races.

                              The computer scoring will be final. Laps will not be added for going under on the wrong lane.

                              Any and all repairs are to be done at the pit table.

                              Open practice on Thursday and Friday will be $10.00 per person/per day. This will be waived if you are racing all the races on that day.

                              Food will be provided.

                              There will be trophies.


                              Thursday Oct. 18 BRM 1:24 Megane IROC
                              Cost - $10.00
                              Practice 10:00 AM until 7:00 PM
                              Race Starts at 7:30 PM
                              We will run 7-10 minute heats depending on the number of entries.

                              Friday Oct. 19 Slot.It Group C and Manufacturers race 5 8 min heats each
                              Practice 10:00 AM 6:30 PM
                              Slot.It group C race 7:00 PM
                              Cost - $20.00
                              Motor - Orange End Bell
                              Tire - SC-2009
                              In-line only as per rules, open gear ratio.

                              Manufacturers Challenge race- will follow
                              Cost - $20.00
                              Tire SC-2007
                              Open motor (same manufacturer as car) gears from any of approved brands per rules.

                              Saturday Oct. 20 Practice starts at 8:00 AM
                              Tech 9:00 AM until 11:00 AM
                              Both the BRM and Scaleauto cars should be turned in at this time. Please have them in Tech no later than 10:00.

                              All races will be 5-8 min. depending on the number of entries

                              BRM 1:24 11:00 AM 1:00 PM
                              Cost - $20.00
                              Motor Black
                              Tires - SC-2424
                              Gear 9:34

                              Arrow IROC 2:00 PM 4:00 PM
                              Cost - $10.00

                              Megane IROC 5:00 PM - 7:00 PM
                              Cost - $10.00

                              Scale Auto 1:24 8:00 PM 10:00 PM
                              Cost - $20.00
                              Motor SC-0025 only.
                              Tires SC-2421P
                              Gear 12:44


                              Sunday Oct. 21 Practice starts at 8:00 AM
                              Tech 9:00 AM 11:00 AM
                              Both the BRM and Scaleauto cars should be turned in at this time. Please have them in Tech no later than 10:00 AM.

                              BRM 1:24 Endurance race - (Minimum 2 man teams) 6 Teams
                              30 minute heats
                              11:00 AM 2:00 PM
                              Cost $40.00 per Team
                              Motor Black
                              Tires - SC-2424
                              Gear 9:34

                              Scale Auto 1:24 Endurance race (Minimum 2 man teams) 6 Teams
                              30 minute heats
                              3:00 PM 6:00 PM
                              Cost - $40.00 per team
                              Motor SC-0025
                              Tires SC-2421P
                              Gear 12:44


                              If you race all the races, the cost is $110.00 for the individual races and $40.00 per team/per race for the endurance races

                              If you pay by October 5 and race the entire schedule, you will save $20.00. The cost would be $90.00 plus the endurance races.

                              If you run 4 or less races, the fee will be $5.00 per race more.

                              Any entry fee paid after October 11 will include a flat $25.00 per person late fee.

                              Please enter early to save money. Please let us know if you have a problem with the prepayment. We may be able to work out a solution.

                              For race entry please contact Ricky at the Race Wear Store.

                              1-443-790-3606
                              Last edited by Scaleracing; 09-26-2012, 12:27 PM.
                              Alan Smith
                              SCI Owner.
                              www.scaleracing.com
                              www.slotcarillustrated.com
                              www.facebook.com/scaleracingcenter
                              www.132slotcar.us

                              1-253-255-1807

                              Comment

                              Working...
                              X