Announcement

Collapse
No announcement yet.

Scalracing Endurance series Round 3 Suzuka 17/18 August

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Scalracing Endurance series Round 3 Suzuka 17/18 August

    In the planning stages for Round 3(I think its 3) of the Scaleracing Endurance series.

    17 August 2012 Friday
    1. Test, tune and tech for Endurance Race
    2.Scaleauto 1/24 Porsche GT3 IROC race
    3.Scaleracing Group C Sprint race - S2 tyres

    18 August 2012 Saturday
    10 am - 1 hour final test for endurance race
    11:30am - Start of 6 hour Endurance race

    Endurance race will be for 2 classes of car, each car must run for 3 hours. Cars to run are:
    Scaleracing LMP Challenge rules cars on S2 tyres and Scalextric GT cars with modifications allowed as per the rules. Scalextric cars may keep their stock front wheels and axles. All GT cars must run with a rear wing.

    GT Class Rules
    Scalextric GT cars with Slot.It running gear and Teal motors.
    Slot.It guide allowed, lights are mandatory.
    Slot.It S1 tyres. PT03 20x12
    All cars have to run 17mm wheels, wheels/tyres must not be visible outside of the body when viewed from above.
    No altering of the chassis/body allowed. Except for the mounting tabs on the interior and the locators for the bearings(on the interior) may be removed. The body post locators on the chassis maybe reamed out in order to create float!
    Light sanding of chassis allowed.
    Cars can run none stock liveries.
    No Super resistant cars allowed.


    The Ferrari F430 needs the SIPA38X 17X8 NARROW HUB wheels:
    http://www.132slotcar.us/store/produ...oducts_id=2914
    but the Astons can handle the regular SIPA18X 17X8s:
    http://www.132slotcar.us/store/produ...roducts_id=579

    I had to use a 19mm spur and 6.75mm pinion to get the mesh right:
    http://www.132slotcar.us/store/produ...oducts_id=4867
    http://www.132slotcar.us/store/produ...oducts_id=3596

    This guide works well with it trimmed for length and slightly for depth as at full-depth it sucks junk out of the slot onto the racing line: http://www.132slotcar.us/store/produ...roducts_id=614

    LMP Class

    Will follow the Scaleracing Manufacturers Challenge 2012 Rules using Slot.It S2 tires

    Attached Files
    Manufacturers Challenge Rules 2012.pdf (105.9 KB, 31 views)
    ScaleracingSlot.ItGroupCRules-1.pdf (130.9 KB, 2 views)

  • #2
    Seeing as this is a sanctioned event I was reminded it might be prudent to post this here.

    Comment

    Working...
    X