Announcement

Collapse
No announcement yet.

Power supply -adding adjustment

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    The schematic that I posted shows the markings on the diodes and indeed they must all be pointed the same way. Which way the diodes needed to be pointed would depend on how your track was wired. As Al pointed out if they don't work in one direction just turn them around.
    I started writing an article on power supplies yesterday, that will probably get posted in a week or so.

    Comment


    • #17
      OK, so I work fast! Here is an article hot off of the presses! Comments would be welcome.
      https://drive.google.com/file/d/16w5...ew?usp=sharing

      Comment


      • #18
        Thank you for the detailed replies. I ordered the voltage regulator that jmacartney referenced
        It will be a little while before my layout build gets to the point of being drivable.

        Comment

        Working...
        X