Announcement

Collapse
No announcement yet.

Lap counting missed for very short laps

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Lap counting missed for very short laps

    Hi

    while testing my custom COM interface developed to integrate Ultimate Racer with my Polistil electronic Lap Counter setup, I found the program being not able to count a lap if it is shorter than around 2,5 secs, on my Athlon 700Mhz running Windows 98SE

    Checking the interface with the test feature found in the Hardware Settings - Hardware page, the COM pin is correctly shown as UP (green light on) even with a really shorter interval (less than a second)

    Is there any way to solve it (apart going slower :-) or running on a longer track) ?

  • #2
    have you check the minimal acceptable lap time value is lower than 2.5 secs ?

    Settings -> Hardware -> Circuit

    /P.

    Comment


    • #3
      Opsssssssssss, now I understand what was the meaning of that field...



      Comment

      Working...
      X