Slot Car Illustrated Forum

Slot Car Illustrated Forum (http://slotcarillustrated.com/portal/forums/index.php)
-   VIASUE Lap Counters. (http://slotcarillustrated.com/portal/forums/forumdisplay.php?f=207)
-   -   Plug and Play Lap Timer Support (http://slotcarillustrated.com/portal/forums/showthread.php?t=55115)

VIASUE 11-14-2011 02:39 PM

Plug and Play Lap Timer Support
 
Hi :yo: We would like to use this area for support of our "Plug and Play" lap timers / lap counters. If you have questions or need answers please come here and make a post. We will check for new posts on a regular basis. We will reply to each of them, making the info then available to you and for others to use or share.

Thanks again for asking questions or sharing lap timer concerns here at SCI with and by VIASUE !:first:

PS. To find VIASUE " On The Web" Please search Bing or Google for VIASUE....you will find us :thumb:

007jag 11-16-2011 05:17 PM

Hello,
What is the process for sending in track to get "wired" with your system ?
Cost, parts etc?
Thanks,
Jack

Hi Jack I am not sure what track type you have, and how many lanes please send us and e-mail so we can exchange exact information. Using your track for HO it is the same as our SCI Sale price less 6$ using your track for a 4 lane ...less 4$ using your track on a 2 lane . S&H $19.95 West of the Mississippi and $16.95 east of the Mississppi delivered USPS by Dec 25th. likely sooner, that will depend on when you order.

We will reply to your e-mail with our mailing address and an exact quote or PayPal Payment request. You can make direct payment VIA PayPal to our e-mail address or we will need your email to send the PayPal Payment Request. IF you order between now and Dec 15th 2011 we will extend the Free Shipping Offer. Saving you perhaps 26$ which will cover your cost to ship your track to us and keep a little more money in your pocket. :>)


VIASUE Forum Admin
Please also visit our web site!

VIASUE 01-21-2012 08:12 PM

Set up - The Short Version
 
LAP TIMER HARDWARE AND SOFTWARE SET UP - THE SHORT VERSION
PLEASE FOLLOW THE BELOW VIASUE INSTRUCTIONS BEFORE STAGING RACES, THANK YOU

PLEASE CONNECT THE LAP TIMER TO THE PC & POWER UP THE LAP TIMER LIGHT BRIDGE / GANTRY
PLEASE CENTER LEFT TO RIGHT FRONT TO BACK THE GANTRY OVER THE TRACK SENSORS
THE GANTRY POWER WIRES SHOULD BE ON THE SAME SIDE AS THE TRACK PC CABLES

PLEASE INSTALL THE LAP TIMER 2000 SOFTWARE FIRST
AFTER INSTALLATION SHUT DOWN AND REOPEN LAP TIMER 2000 (LT2K)

CLICK THE "PORTS" ICON
SELECT "PRINTER PORT"
ONLY IF YOUR TIMER USES A STANDARD PARALLEL PRINTER PORT CONNECTION ( 2 ROWS 25 PINS )
SELECT "GAME PORT"
ONLY IF YOUR TIMER USES A STANDARD GAME PORT CONNECTION ( 2 ROWS 15 PINS )
SELECT "TRAK MATE COMPUTABILITY" WHEN AVAILABLE AS AN OPTION
THEN RESTART THE LT2K SOFTWARE

CLICK "EDIT"
CLICK "I/O PORT TEST"
CLICK "TEST"
THE 4 LANE I/O PORT TEST RESULT SHOULD BE:

(L1) CLOSED (L2) OPEN (L3) CLOSED (L4) CLOSED
COVER ALL OF THE TRACK SENSORS THE RESULT SHOULD REVERSE :
(L1) OPEN (L2) CLOSED (L3) OPEN (L4) OPEN
UNCOVER THE TRACK SENSORS THE RESULT SHOULD REVERSE:
(L1) CLOSED (L2) OPEN (L3) CLOSED (L4) CLOSED

THIS COMPLETES LT2K INSTALLATION AND THE I/O PORT TESTS
WHEN THE ABOVE TESTS ARE DONE CORRECTLY AND THE RESULTS ARE AS MENTIONED
IT INDICATES THE SOFTWARE INSTALLATION AND LAP TIMER HARDWARE INSTALLATION WENT CORRECTLY
IF THE ABOVE TESTS DO NOT GO CORRECTLY PLEASE CONTACT VIASUE FOR SUPPORT
[email protected]

INCLUDED ON YOUR CD IS:
LAP TIMER 2000 FOR WINDOWS 95 ONLY
LAP TIMER 2000 FOR WINDOWS 98 AND UP
RACE COORDINATOR FOR WINDOWS XP AND UP
IF YOU HAVE WINDOWS XP OR HIGHER YOU CAN RUN BOTH SOFTWARES
* PLEASE USE THE ONE THAT WORKS BEST ON YOUR PC AND FOR YOUR RACING NEEDS
LT2K HAS A SHORTER LEARNING CURVE AND RC HAS A LONGER ONE BUT IS MORE OPTION EMBEDDED
PLEASE READ ALL CD READ ME FILES BEFORE INSTALLING RACE COORDINATOR
THE READ ME FILES ARE HELPFUL AS ARE THE HELP MENUS AND SOFTWARE DEMO MODES
THE RACING SOFTWARE DEVELOPERS OFFER FOR THEIR SOFTWARE ~ " NOT THE HARDWARE "
SOFTWARE SUPPORT, RACING TUTORIALS, TROUBLE SHOOTING, DOWNLOADS
& MUCH MORE LT2K & RC

IF YOU NEED HARDWARE AND SET UP SUPPORT ~ IF YOU HAVE TESTING ISSUES ~ PLEASE DO NOT HESITATE TO CONTACT
[email protected]

WE ARE HERE TO HELP:help:
THANK YOU FOR YOUR PURCHASE AND TRUST

WE ARE LUCKY TO HAVE CUSTOMERS LIKE
YOU YOUR FAMILY AND HOPEFULLY YOUR FRIENDS ......

HAVE A BLAST STAGING RACES AND SETTING NEW TRACK RECORDS !!
VIASUE VIA OUR HOME PAGE ~ VIASUE VIA SEARCH ENGINES ~ VIASUE VIA EBAY
~ VIASUE VIA SLOT CAR ILLUSTRATED

YOUR :first: IN OUR BOOK !


GoFly 03-16-2012 02:57 AM

Do you offer a timer for Carrera Go?

VIASUE 03-18-2012 01:54 PM

Carrerra Track and Our System
 
Yes we can install our system into Carrerra track BUT you would need to send us the track section(s). Sorry at this time we do not carry them in stock. We will discount any order for sending us your track 5$ on a 2 lane and 10$ on a four lane etc. Some sellers on ebay ship free. Please have them ship to us directly.

Please contact [email protected] for a firm price quote for all your needs.We also offer add ons of longer pc cable 15$ and pre wired pigtails for user provided track call buttons and power relay controls for the track power or individual lane power controls. We also offer coupled connections of power and pc in special cases 15$ as well.

Available connection types are:
Parallel Printer Port Connection = 2 rows 25 pins ( only port for call and power relay options )
Game Port Connection = 2 row 15 pins
Serial &/or Com port Connection = 2 row 9 pins

ADAPTERS to USB:
IN ALL CASES IT DEPENDS ON THE SOFTWARE BEING USED BUT NOT USUALY THE LAP TIMER

Support of Adapters to USB Use is provided by the Software Developer
VIASUE supports use of direct port connections

Thanks for asking Paul of VIASUE
Tech Support Admin
:first:


All times are GMT -7. The time now is 07:52 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.