SCI Logo

Scalextric USA
Pioneer Slot Cars
SCIs  MarketPlace, the online slot car mall
Carrera Slot Cars
Fly Model Car
BRM Model Cars
NINCO
MRC
AFX
Slot.it
Slot Car Illustrated Forum
  #1  
Old 09-14-2018, 07:57 AM
SHAMONG SHAMONG is offline
National Racer
View SHAMONG's Photo Album
 
Join Date: May 2007
Location: USA
Posts: 204
Default Pinion twisters race announcement

PINION TWISTERS RACE ANNOUCEMENT FOR : (ONLY QUICK SLICKS OR SUPER TIRES ALLOWWED)
10/6/18 NINCO GT JAWS 17K MOTOR, FLY TRUCKS NA RULES JAWS 17K MOTOR
Pinion Twisters, 243 South Pavilion Avenue, Riverside NJ. Track opens 10 am for practice, and shuts down 12 noon for tech inspection. Racing starts at 1 pm.

NINCO GT
CARS: ANY NINCO GT CAR WITH OR WITHOUT POD ( LIGHTNING VERSION ALLOWED)
MOTOR
: JAWS 17K MOTOR
CHASSIS: WITH OR WITHOUT POD ( LIGHTNING VERSION ALLOWED)
BODY:
MAY REMOVE FLASH TO ALLOW FOR PROPER BODY FLOAT.
INTERIOR:
STOCK NO MODIFICATIONS
WHEELS:
ANY MANUFACTURE
TIRES:
ANY MANUFACTURE
GUIDE:
ANY NINCO
WIRE:
MAY CHANGE LEAD WIRE TO ANY MANUFACTURE .
AXLES:
ANY MANUFACTURE
GEARS:
ANY MANUFACTURE
SCREWS:
ANY MANUFACTURE
BUSHINGS:
ANY MANUFACTURE
WEIGHT: ANY MANUFACTURE INSIDE CAR ONLY


FLY TRUCKS NA RULES JAWS 17K MOTOR

http://www.slotcarillustrated.com/po...13&postcount=1


11/4/18 SLOT.IT DTM BOX STOCK, Pinion Twisters, 243 South Pavilion Avenue, Riverside NJ. Track opens 10 am for practice, and shuts down 12 noon for tech inspection. Racing starts at 1 pm.
CARS: SLOT.IT OPEL, ALFA ROMEO
MOTOR
: STOCK
CHASSIS: STOCK (INLINE CONFIGURATION ONLY 0.5 MM CH110 POD
) MAY REMOVE FLASH FOR PROPER BODY FLOAT
BODY:
MAY REMOVE FLASH TO ALLOW FOR PROPER BODY FLOAT. MAY TAPPER BODY POST TO ALLOW FOR FLOAT
INTERIOR:
STOCK NO MODIFICATIONS
WHEELS:
STOCK
TIRES:
STOCK FRONTS (MAY TRUE ONLY TO MAKE TIRE EVEN NOT A RUBBER BAND) AND ANY MANUFACTURE REAR SILICONE
GUIDE:
STOCK (MAY CHANGE BRAID TO ANY MANUFACTURE BUT GUIDE MUST REMAIN STOCK)
WIRE:
MAY CHANGE LEAD WIRE TO ANY MANUFACTURE .
AXLES:
STOCK
GEARS:
STOCK
SCREWS:
ANY MANUFACTURE
BUSHINGS:
STOCK
WEIGHT: ANY MANUFACTURE INSIDE CAR ONLY



MULTI-MANUFACTURE GT 22K LIMIT ON MOTOR
Multi-manufacture GT
CARS: 1997- present gt1, gt2, gt3 cars allowed
MOTOR: Any readily available motor up to 22,000 rpm (avant slot mag motor "blue" not allowed or any motor similar to the down force of such motor, NO DOODOO MOTORS)sidewinder, inline or anglewinder configurations are allowed.
motor tabs may not be damaged in anyway
GUIDE BLADE: any manufacture guide blade.May not solder lead wire to braid on guide flag
WIRE: any manufacture lead wire
SILICONE TIRES: any manufacture silicone tire
WHEEL INSERTS: any manufacture wheels with inserts
MOTOR POD: any manufacture motor pod
BUSHINGS AND BEARINGS: any manufacture ball bearings and or bushings are allowed
GEARS: any manufacture gears and gear ratio
CHASIS:any readily available 3D chassis. Scalextric PCR chassis may also be used. No modofications allowed to the body or chassis. Chassis maybe sanded but only to remove burrs from chassis mold
INTERIOR: any manufacture lexan interior allowed.
WEIGHT: lead weight allowed inside car only
.040 clearance to tech block




12/15/18 FLY CLASSIC ( ANY FLY CLASSIC/ FLYSLOT/GB TRACK FOLLOWING NA RULES) SIDEWAYS GRP 5 FOLLOWING NATIONAL RULES.
Pinion Twisters, 243 South Pavilion Avenue, Riverside NJ. Track opens 10 am for practice, and shuts down 12 noon for tech inspection. Racing starts at 1 pm.
ANY FLY CLASSIC/ FLYSLOT/GB TRACK FOLLOWING NA RULES
http://www.slotcarillustrated.com/po...81&postcount=1

SIDEWAYS GRP 5 FOLLOWING NATIONAL RULES
http://www.slotcarillustrated.com/po...79&postcount=1



MORE INFORMATION TO FOLLOW PLEASE MARK THE DATE ON YOUR CALENDER
Post questions here, or contact:
Don J (856-264-5872)

Last edited by SHAMONG; 10-02-2018 at 09:00 AM.
Reply With Quote
  #2  
Old 10-02-2018, 09:03 AM
SHAMONG SHAMONG is offline
National Racer
View SHAMONG's Photo Album
 
Join Date: May 2007
Location: USA
Posts: 204
Default Race reminder pinion twister 10/6/18

PINION TWISTERS RACE ANNOUCEMENT FOR : (ONLY QUICK SLICKS OR SUPER TIRES ALLOWWED)
10/6/18 NINCO GT JAWS 17K MOTOR, FLY TRUCKS NA RULES JAWS 17K MOTOR
Pinion Twisters, 243 South Pavilion Avenue, Riverside NJ. Track opens 10 am for practice, and shuts down 12 noon for tech inspection. Racing starts at 1 pm.

NINCO GT
CARS: ANY NINCO GT CAR WITH OR WITHOUT POD ( LIGHTNING VERSION ALLOWED)
MOTOR
: JAWS 17K MOTOR
CHASSIS: WITH OR WITHOUT POD ( LIGHTNING VERSION ALLOWED)
BODY:
MAY REMOVE FLASH TO ALLOW FOR PROPER BODY FLOAT.
INTERIOR:
STOCK NO MODIFICATIONS
WHEELS:
ANY MANUFACTURE
TIRES:
ANY MANUFACTURE
GUIDE:
ANY NINCO
WIRE:
MAY CHANGE LEAD WIRE TO ANY MANUFACTURE .
AXLES:
ANY MANUFACTURE
GEARS:
ANY MANUFACTURE
SCREWS:
ANY MANUFACTURE
BUSHINGS:
ANY MANUFACTURE
WEIGHT: ANY MANUFACTURE INSIDE CAR ONLY


FLY TRUCKS NA RULES JAWS 17K MOTOR

http://www.slotcarillustrated.com/po...13&postcount=1
Reply With Quote
  #3  
Old 10-30-2018, 11:29 AM
SHAMONG SHAMONG is offline
National Racer
View SHAMONG's Photo Album
 
Join Date: May 2007
Location: USA
Posts: 204
Default

Race has been canceled to allow the running of the Sideways Lamborghini and Scalextric BTCC regional qualifier at Pinion Twisters. Race will be posted for another date and time.
Reply With Quote
Reply

Bookmarks
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   
  •   

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 04:45 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.