Ultimate Racer 3.0 support

[pfcr33]

I Run the “Setup.exe”
The screen comes up “Do you accept the terms of the pending License Agreement?” for .NET Framework 3.5
I click “Accept”
Says it is downloading dotnet
Then this is the error I get:
“Another verison of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Progams on the Control Panel”

I am running W7 x64 btw

[Ricky Torpedo]

Originally Posted by pfcr33

I Run the “Setup.exe”
The screen comes up “Do you accept the terms of the pending License Agreement?” for .NET Framework 3.5
I click “Accept”
Says it is downloading dotnet
Then this is the error I get:
“Another verison of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Progams on the Control Panel”

I am running W7 x64 btw

couple of clarifications:
- are you getting this error when you install UR30?
- keep in mind ur30 is compiled for 32bits. What's about running UIR30 installation/update in 32bit mode?

[pfcr33]

Originally Posted by Ricky Torpedo

couple of clarifications:
- are you getting this error when you install UR30?
- keep in mind ur30 is compiled for 32bits. What's about running UIR30 installation/update in 32bit mode?

Yes I was installing UR30 3.0.30b2, When I went to start UR 3.0.30b1 on Sunday it suggested there was a update for 3.0.30b2, so I downloaded it and tried to install it. I am currently running UR30 3.0.30b1 on the W7 x64 with no issues at all and it installed fine.

I just tried to download it again to make sure the files were not corrupted and it is no longer in the list of downloads.

[Ricky Torpedo]

Originally Posted by pfcr33

Yes I was installing UR30 3.0.30b2, When I went to start UR 3.0.30b1 on Sunday it suggested there was a update for 3.0.30b2, so I downloaded it and tried to install it. I am currently running UR30 3.0.30b1 on the W7 x64 with no issues at all and it installed fine.

I just tried to download it again to make sure the files were not corrupted and it is no longer in the list of downloads.

30b1 is available here: http://uracer.org/ur30/UR30_30b1.zip

You do not need to install dotnet to run 30b2 on W7. I just would like to know first:
- when does UR30 ask you for .net? During the installation or when starting UR30?
- when does UR30 30b2 hang?

Thx for the clarifications.

In case of interest: a google with W7 & .net 3.5 compatibility:
http://www.google.com/search?q=dotne...equested+on+W7

[pfcr33]

Originally Posted by Ricky Torpedo

30b1 is available here: http://uracer.org/ur30/UR30_30b1.zip

You do not need to install dotnet to run 30b2 on W7. I just would like to know first:
- when does UR30 ask you for .net? During the installation or when starting UR30?
- when does UR30 30b2 hang?

Thx for the clarifications.

In case of interest: a google with W7 & .net 3.5 compatibility:
http://www.google.com/search?q=dotne...equested+on+W7

it happens when I try to install UR30.

Attached is some screen shots of what I see.

[Ricky Torpedo]

Originally Posted by pfcr33

it happens when I try to install UR30.

Attached is some screen shots of what I see.

ok, thx. Never get this one before! I'll check the setup options.

Workaround: install ur30 on another box, then copy & paste racer30 installation folder from the new installation to the box you want to make the installation. Caution: save a copy of your databse before, then restore it after the copy (slotcar30.db file)

[pfcr33]

Originally Posted by Ricky Torpedo

ok, thx. Never get this one before! I'll check the setup options.

Workaround: install ur30 on another box, then copy & paste racer30 installation folder from the new installation to the box you want to make the installation. Caution: save a copy of your databse before, then restore it after the copy (slotcar30.db file)

I installed it onto W7 32bit with no problems and copied the files over and is now working

[pfcr33]

I’m now running UR30 3.0.30b2, thanks for all you ,
I have an issue saving a new track and using save as. I can edit and existing track and it saves fine.
I have tried on W7 x86 and W7 x64
On W7 x86 when I click save or save as the application just crashes.
On W7 x64 when I click save or save as, the save dialog box comes up, but it is blank and just hangs.

[Ricky Torpedo]

Originally Posted by pfcr33

I’m now running UR30 3.0.30b2, thanks for all you ,
I have an issue saving a new track and using save as. I can edit and existing track and it saves fine.
I have tried on W7 x86 and W7 x64
On W7 x86 when I click save or save as the application just crashes.
On W7 x64 when I click save or save as, the save dialog box comes up, but it is blank and just hangs.

??? never see that before! Have your system the correct service pack level?
Have you tried to run ur30 as administrator?
Can you check you have full access rights on ur30 installation folder?

:c onfused:

[pfcr33]

Originally Posted by Ricky Torpedo

??? never see that before! Have your system the correct service pack level?
Have you tried to run ur30 as administrator?
Can you check you have full access rights on ur30 installation folder?

:c onfused:

On the W7 x64
SP1.
Yes Tried as to run as administrator.
Yes have full access rights to Racer30 folder and all subfolders. :/

Not near the W7 x86 PC to check.

[Ricky Torpedo]

Originally Posted by pfcr33

On the W7 x64
SP1.
Yes Tried as to run as administrator.
Yes have full access rights to Racer30 folder and all subfolders. :/

Not near the W7 x86 PC to check.

Will try on W7 again. Note: UR30 is compiled for 32bits.

[pfcr33]

Originally Posted by Ricky Torpedo

??? never see that before! Have your system the correct service pack level?
Have you tried to run ur30 as administrator?
Can you check you have full access rights on ur30 installation folder?

:c onfused:

On the W7 x86 (32bit) (local administrator of the PC)
SP1.
Yes Tried as to run as administrator.
Yes have full access rights to Racer30 folder and all subfolders.

This was a new install of 3.0.30b2, should I try uninstalling 3.0.30b2 then installing 3.0.30b1 then installing 3.0.30b2?

[JCZPT]

Ricky, when i tried updating to 3o.b download i got a MFC application error.
so i went back to the older version and it works find, Whats wrong?

[Ricky Torpedo]

I am proceeding with W7 tests (please refer to the thread about the save layout crash for the analysis).

Interesting FAQ for information: www.uracer.org/ur30/FAQ.htm#Q2

[rocket111]

hi,any news on when UR30 will be able to be used with ninco pb.it seems to be an awesome program and cant wait to use it.Dont want to download before it is compatible.
thanks