Announcement

Collapse
No announcement yet.

BigT new to digital carrera 1/32 &1/24 all help wanted.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • BigT
    replied
    Dave we’re running 18 volts on power supply full power on cu about 4 1/2 on brakes 5.7 sec lap times killing it. How’d ya like Tom’s build on the Dunlop bridge ? I think it turned out awesome and his advertisement ideas on the flat screen tv’s was epic and the lights dimable just awesome.

    Leave a comment:


  • carlosinseattle
    replied
    I agree with Tom...BEST RACE EVER!!! You guys are getting really good at racing with those cars in that configuration. Wish I was there to race with you.

    Leave a comment:


  • dw5555
    replied
    You're running 100% power? What voltage are you set at?

    Leave a comment:


  • BigT
    replied
    Hey ts thanks for watching and asking questions, these are 1/24 scale Audi R8 all running magnets same speed setting (full) rms motors with silicone tires. We also run 1/32 scale in same configuration.. if you have a YouTube or videos send me a link I enjoy seeing what others do in the hobby. Welcome to the rabbit hole

    Leave a comment:


  • tdsanders62
    replied
    It appears that you guys had a great time. Great video, thanks for sharing. Questions for you because it’s hard to tell on the video…
    Scale?
    Magnets or non-magnets?
    Tire brand & type?
    Are you all running the same speed level?
    Thank again. TS

    Leave a comment:


  • BigT
    replied
    our best 50 lap race ever only one crash the entire race unfortunately it was me who crashed ;-)

    Leave a comment:


  • BigT
    replied
    Here's something a little different from me. Tom finally finished my Dunlop bridge after four months of contemplating design changes and lighting. Came out real nice ton's of thanks to tom I never would have had the patience to build it not my strong point. Sorry about the fan noise it's hot as hell here last couple weeks :-)

    Leave a comment:


  • BigT
    replied
    Last nights racing. I got the new frankenslot wireless controller which is awesome but is taking some getting used to changing lanes is backwards to me now because I'm use to the plunger carrera controller. But oh how I love my new controller. I'm not sure how to program the launch control yet but when I do look out. As you might notice on my bar in the background I have received my Dunlop cross over bridge,Tom assembled for me( he's in charge of landscaping and track Art). Boy he modified the building with some cool extras to personalize it to our track!!!!! Stay tuned for a little video on the dunlop tower later tonight or tomorrow. whoop's I guess you all cant see the building on the bar because of the smartrace screen blocking it. guess you'll have to wait :-)

    Leave a comment:


  • BigT
    replied
    Thanks Greg that's the way I'm going

    Leave a comment:


  • MrFlippant
    replied
    Carson chip would be the easiest, but keep in mind the following:
    1) you don't get ghost or pace function
    2) if the car makes t he CU beep like crazy, cut the cap off the ferrite man from the guide. In some cases, you can just snip one of the legs above the where the wire is soldered. I don't know why, but sometimes that happens, and snipping it usually fixes it.

    Leave a comment:


  • BigT
    replied
    I'm just a poor unemployed heavy equipment operator try to squeak by, Any Idea what chip I need for Legend cars for my carrera track? Wait till you see my Dunlop cross over bridge, Tom built it for me with plenty off extras I'm so excited haven't seen it since i dropped it off 3 months ago , video coming soon as I get it in my position.

    Leave a comment:


  • dw5555
    replied
    I love those Legend cars. Times like this I wish I was into the smaller scale but I have enough 1/24's that I still want and I don't have your money.

    Leave a comment:


  • BigT
    replied
    Look at the treats that arrived today. is the carson chip the way to go with the ledgends cars? Loving the wireless franken slot controllers.
    You do not have permission to view this gallery.
    This gallery has 10 photos.

    Leave a comment:


  • BigT
    replied
    Thanks Greg that solved my problem, glad I know the guru of digital slot cars :-) This forum has been a god send for me

    Leave a comment:


  • BigT
    replied
    Originally posted by MrFlippant View Post
    Not a new problem, just one most people don't run into.

    The wireless controllers will always take precedence over wired controllers. When you put the dongle in programming mode, you're essentially disabling all the wireless controllers while it waits for a wireless controller to be programmed to that number. While that's happening, the wired controller(s) will work.

    Let the #2 wireless controller go to sleep (or don't wake it up, or disconnect the battery) and your wired controller plugged into port #2 will work.
    Thanks mrflippant i'll give that a try. be nice to race with my new controller.

    Leave a comment:

sex vidio
antalya escort
tsyd.org/lisansli-canli-bahis-siteleri-2022-guvenilir-bahis-siteleri
lara escort escort istanbul escort sirinevler escort antalya
atasehir escort taksim eskort lara eskort bayan bakirkoy bayan eskort
gaziantep escort
gaziantep escort
erotik film izle Rus escort gaziantep rus escort
bahisnow giriş casinoslot sultanbet giriş grandpashabet giriş
kadikoy escort kartal escort
eurocasino
brazzers
Blonde and brunette dirty 3some in semi obscure Профессор трахнул студенту толстым хером pelicula embarazada por accidente
Working...
X