Announcement

Collapse
No announcement yet.

Polarity Question with DS system

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Polarity Question with DS system

    This may be a silly question but i am trying to make sure I understand the way the DS is supposed to work. I am uising the DS-300 with DS-334 and DS-356. I have 3 DS-0061 stop and go boxes and 3 Variable power supplies (1 for each lane pair)

    My question is what is the Track polarity when using this setup. i am using Ninco track, however I used the direct power tap tracks (professer motor and DS) It seems to me it should be "Positive" but since I use simple Parma Economy controllers it is hard to tell for sure. I only have experience with this setup so that is the reason for the question. We tried a Ninco "Tron" electronic controller out and it burned it up in a few minutes. On my second attempt with a cheaper Ninco electronic controller it works in "Reversed Polarity" mode when connecting the stock Banana plug jumper (converts the 1/4in to Red/Wht/Black) to the appropriate color connectors on the stop and go.

    We are trying to add standard alligator clip style connection points at the driver stand and I want to make sure I know what polarity to tell the drivers.

    Thanks

  • #2
    Ours is Positive

    Our track at Sling Shot Speedway, a 6 lane ninco, uses DS timing
    -ds300 base module
    -ds334 lane 3 and 4 module
    -ds356 lane 5 and 6 module
    -ds0056 light bridge
    -ds0021 stop n go boxes
    -ds 0100 controller adapters (wired to post terminals on the driver station, from slot car corner)
    -radio shack power supply for the ds300
    -MG power supplies, 1 for each lane, from professor motor

    And it is Positive Polarity. Professor Motor controllers with Positive Polarity are standard equipment for rentals.
    Last edited by low tech; 02-04-2013, 09:43 PM.

    Comment


    • #3
      "This may be a silly question....."

      Not silly. I do believe you've got it wired 'Positive' polarity but I am not about to swear to it.
      NINCO powerbases are wired negative so by switching the NINCO controller to 'reverse polarity' it should be set to 'positive'. I think.

      Let me think about this one. Or have Alan think about it.

      Comment

      sex vidio
      antalya escort
      lara escort escort istanbul escort sirinevler escort antalya
      beylikduzu eskort bayan taksim eskort lara eskort bayan bakirkoy bayan eskort
      gaziantep escort gaziantep escort
      izmir escort kayseri escort gaziantep rus escort
      replica watches
      kadikoy escort kartal escort
      eurocasino
      brazzers
      Blonde and brunette dirty 3some in semi obscure Профессор трахнул студенту толстым хером pelicula embarazada por accidente
      Working...
      X