Tweet
Hi to everybody,
this time we have tried and envoy to comparison three tires models 19x10,5: Scaleauto, Spirit and MB slot.
The tires Scaleautos code SC4733 are fit for wheels from 15 to 17 mms of diameter no air sistem.
In the wrapping of the tires Spirit code S00303 we also find the measure 18x8 that we have not tried.
The measure 19x10,5 mm is fit for wheels from 15 to 17 mms of diameter no air sistem.
the tires MB Slot 19x10,5 are the code: 30002 fit for wheels from 15 to 17 mms of diameter.
In this test our tireses have been compared on a track Polistil, with the model Gruppo C of Slot.it, the Porsche 956.
The used wheels are the Slot.its from 15 mms, all and three the climbed on tires they have reached the diameter of around 19,5 mms and a width of 10,5 mms.
Our objective was that to individualize the tires that guaranteed the most greater adherence and speed in curve.
Is our Grip Test developed to constant speed and it shows us the maximum speed in curve, is this system very useful to appraise the equilibrium of our model and the degree of adherence of the tires, but thing happens when it is had to go out of a curve in full acceleration?
In this Test we have added the test of traction, using the command SCP1 Slot.it in formality "GOST" we will make to depart our model of the entrance of a curve hold to 180°, our reference it will be the regulation of the command SCP1.
These are the results:
Scaleauto SC4733 TTS: 11,979 second TT: 7 regulation SCP1
Spirit S00303 TTS: 12,000 second TT: 6,5 regulation SCP1
MB slot 30002 TTS: 11,760 second TT: 8,2 regulation SCP1
To notice that I/you/he/she exceed a model I deprive of suspensions, the new test of traction confirms her/it "classification" suitable for the TTS, test to constant speed.
We wish of a regard and good fun to have been useful!
this time we have tried and envoy to comparison three tires models 19x10,5: Scaleauto, Spirit and MB slot.
The tires Scaleautos code SC4733 are fit for wheels from 15 to 17 mms of diameter no air sistem.
In the wrapping of the tires Spirit code S00303 we also find the measure 18x8 that we have not tried.
The measure 19x10,5 mm is fit for wheels from 15 to 17 mms of diameter no air sistem.
the tires MB Slot 19x10,5 are the code: 30002 fit for wheels from 15 to 17 mms of diameter.
In this test our tireses have been compared on a track Polistil, with the model Gruppo C of Slot.it, the Porsche 956.
The used wheels are the Slot.its from 15 mms, all and three the climbed on tires they have reached the diameter of around 19,5 mms and a width of 10,5 mms.
Our objective was that to individualize the tires that guaranteed the most greater adherence and speed in curve.
Is our Grip Test developed to constant speed and it shows us the maximum speed in curve, is this system very useful to appraise the equilibrium of our model and the degree of adherence of the tires, but thing happens when it is had to go out of a curve in full acceleration?
In this Test we have added the test of traction, using the command SCP1 Slot.it in formality "GOST" we will make to depart our model of the entrance of a curve hold to 180°, our reference it will be the regulation of the command SCP1.
These are the results:
Scaleauto SC4733 TTS: 11,979 second TT: 7 regulation SCP1
Spirit S00303 TTS: 12,000 second TT: 6,5 regulation SCP1
MB slot 30002 TTS: 11,760 second TT: 8,2 regulation SCP1
To notice that I/you/he/she exceed a model I deprive of suspensions, the new test of traction confirms her/it "classification" suitable for the TTS, test to constant speed.
We wish of a regard and good fun to have been useful!