Announcement

Collapse
No announcement yet.

Converting SCX Digital to Analog

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Converting SCX Digital to Analog

    So, I mistakingly purchased a digital SCX Cuda and need to convert it to digital do it doesn't become a shelf queen. What is the tried and true method of converting these cars for analog use?

    Paul

  • #2
    You want the analog part that plugs in to replace the digital part. I have extras.

    Comment


    • #3
      Conversion

      Originally posted by kidvoltage View Post
      You want the analog part that plugs in to replace the digital part. I have extras.
      Are you referring to the guide? Just replace the digital guide with one for an analog car?

      QC

      Comment


      • #4
        No. You remove the entire digital unit and replace it with a flat connecting section that bridges the gaps - looks like an "H", kinda. You should also replace the guide blade.

        Comment


        • #5


          You will need one of these so remove your guide blade and see if your prongs are like the one on the left most example or like the two to the right.
          Last edited by kidvoltage; 10-05-2015, 03:02 PM.

          Comment


          • #6
            Thanks! I'll check tonight and get back to you...

            Paul

            Comment


            • #7
              I have a few SCX Nascars that were supposed to be analog and turned out to be digital. I will check how they look and let you know too. :-)

              Comment


              • #8
                Can I convert my digital cars to analog using what's there,just bypassing something?...
                I don't want to have to buy anything if I don't have to.....
                Or if I have to purchase analog parts,where would I find them?...
                Anyone interested in swap digital for analog chips,or whatever i need to swap?...
                Thank you,jd

                Comment


                • #9
                  You do not have to buy any special parts. SCX cars have a set of feelers that contact the braids on the guide flag and another set of feelers that are attached to the motor. To bypass the digital stuff you first need to solder a wire to a place between the guide flag feeler and the chip on either side. Connect each wire to the feeler that is attached to the motor on that side. You must either bend the ends of the motor feelers so they no longer touch the conductors that go back to the the digital chip or at least put some insulating material inbetween.

                  Comment

                  sex vidio
                  antalya escort
                  lara escort escort istanbul escort sirinevler escort antalya
                  beylikduzu eskort bayan taksim eskort lara eskort bayan bakirkoy bayan eskort
                  gaziantep escort gaziantep escort
                  izmir escort kayseri escort gaziantep rus escort
                  replica watches
                  kadikoy escort kartal escort
                  eurocasino
                  brazzers
                  Blonde and brunette dirty 3some in semi obscure Профессор трахнул студенту толстым хером pelicula embarazada por accidente
                  Working...
                  X