Announcement

Collapse
No announcement yet.

Slot.it controllers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Slot.it controllers

    I have an old scp1 analog controller, a scp3 I use wirelessly for analog and a scp3 I use for SSD. If I buy a digital cartridge, can I use any of the controllers for Carrera digital? Thanks!

  • #2
    Yes. The SCP1 will be ready to go, so I'd suggest using that one unless you don't like it any more.
    The SCP3 will need a firmware change when you want to use that cartridge with it.
    Also, ANY of the SCP Digital cartridges (aside from the oXigen one, of course) will work with Carrera, so don't worry about which version it is, if you buy one of the old ones.

    Comment


    • #3
      Originally posted by MrFlippant View Post
      Yes. The SCP1 will be ready to go, so I'd suggest using that one unless you don't like it any more.
      The SCP3 will need a firmware change when you want to use that cartridge with it.
      Also, ANY of the SCP Digital cartridges (aside from the oXigen one, of course) will work with Carrera, so don't worry about which version it is, if you buy one of the old ones.
      My SCP1 is used for analog but I thought constant voltage is needed for oxygen. I’m not understanding what to do to use that controller to use oxygen in analog mode.

      Comment


      • #4
        After more reading I believe I understand it.

        Comment


        • #5
          Sorry, I forgot to make clear that, to use any of them for Carrera Digital (not oXigen on a Carrera digital track, but actual control of D132/D124 cars on a Carrera Digital track), you will need the SCP digital cartridge to fit into the handle, just like the analog cartridge. You could also put that cart into the CRI you use for analog wireless, and have wireless control of Carrera Digital. For that, you would not need to change any firmware in the SCP3 you use for wireless analog. Just swap the analog cart out for the digital one, and race.

          Comment


          • #6
            Originally posted by MrFlippant View Post
            Sorry, I forgot to make clear that, to use any of them for Carrera Digital (not oXigen on a Carrera digital track, but actual control of D132/D124 cars on a Carrera Digital track), you will need the SCP digital cartridge to fit into the handle, just like the analog cartridge. You could also put that cart into the CRI you use for analog wireless, and have wireless control of Carrera Digital. For that, you would not need to change any firmware in the SCP3 you use for wireless analog. Just swap the analog cart out for the digital one, and race.
            I was just about to post saying this. I think I’ll get the scp2 digital controller. Use the cartridge with my cri and use the scp3 wirelessly. Use the scp2 controller for my analog HO track. Thanks for the help Greg!

            Comment

            sex vidio
            antalya escort
            tsyd.org/lisansli-canli-bahis-siteleri-2022-guvenilir-bahis-siteleri
            lara escort escort istanbul escort sirinevler escort antalya
            atasehir escort taksim eskort lara eskort bayan bakirkoy bayan eskort
            gaziantep escort
            gaziantep escort
            erotik film izle Rus escort gaziantep rus escort
            bahisnow giriş casinoslot
            kadikoy escort kartal escort
            eurocasino
            brazzers
            Blonde and brunette dirty 3some in semi obscure Профессор трахнул студенту толстым хером pelicula embarazada por accidente
            Working...
            X