No announcement yet.

Raced at "Aurora Speedway II" this week!!!!

  • Filter
  • Time
  • Show
Clear All
new posts

  • Raced at "Aurora Speedway II" this week!!!!

    I was lucky enough to race on the newly configured Aurora Speedway II track yesterday. Mark was the perfect host!

    I brought, and tried a few of my cars on the track, but they were not setup for Mark's setup. So, Mark offered up a couple of his cars to run, and we had a great time. Best five hours I spent this week. Thanks Mark!!!

    Here's a couple photos of the track.

    IMG_2554.jpg IMG_2555.jpg

  • #2
    That is an amazing layout and great use of space. Cheers to you guys!


    • #3
      Gary, you are most welcome back any time! That was the fastest 5 hours of both racing/"bench racing" I can think of. Other than my grandson & wife, Gary is the only other "racer" who has tried this configuration out; and while I have finalized the track configuration, having Gary there shows me I need to "tighten up" some of the details:

      1. Adapters to allow "alligator clip" controllers (instead of just AFX "plug in" 60 & 120 OHM units) along with "kill switch" capability for each driver station;
      2. Proper Timing System (I have had nothing but trouble getting the AFX Digital Lap Counters to work reliably);
      3. Hook up the variable power unit I have had for years (but not used) in place of the AFX "Tri-Power" wall units.
      4. "Clean up" the wiring this will require, with proper routing beneath the tables, tucked up and out of the way.

      Gary has graciously offered to help with these mods (that is who Gary is; always offering his help/expertise) including building a cabinet to house the power unit/electrics, and I will take him up on this, so I can have the flexibility needed to fulfill the potential this track has.


      • #4
        Originally posted by Steve-E-D View Post
        That is an amazing layout and great use of space. Cheers to you guys!
        Thank you, Steve-E-D; still much to do in terms of detail work. But the configuration has a great "flow" to it, has a challenging variety of different radius curves / length of straights, and is really about as much I can fit in the space and still allow driver stations on both sides and access to everything on the tables (then again, I am almost 6'5", so my "reach" is more than most)......


        sex vidio
        antalya escort
        lara escort escort istanbul escort sirinevler escort antalya
        atasehir escort taksim eskort lara eskort bayan bakirkoy bayan eskort
        gaziantep escort
        gaziantep escort
        erotik film izle Rus escort gaziantep rus escort
        bahisnow giriş casinoslot
        kadikoy escort kartal escort
        Blonde and brunette dirty 3some in semi obscure Профессор трахнул студенту толстым хером pelicula embarazada por accidente