Tweet
Hi Guys,
OK, after a long wait I have decided to revamp the "Cargo Nationals" a bit. I am going to open it up to any Street Car/Truck Model of 1/24th or 1/25th Scale sizing. This way if anyone doesn't want to race a truck they do not have to. Here are the Official Rules........
Rules
Chassis
- H&R Inline chassis kit. See HRCH10 for the exact kit
- All stock parts must be used
- Chassis straightening allowed
- Rear bushings can be soldered in (must be in stock location)
- Maximum chassis width is 95mm
Motor
- Handout the morning of the race (same as the kit motor) 18K Stock H&R Hawk 1 (Super Slow and Amazing Fun!)
- All motors will have pinion and wires on them
- Leads will be fed through guide and your braid
pushed in (no guide clips allowed)
Tires
- Rears are handout the morning of the race. You will be allowed to use the wheels/tires that came with your kit if they are deemed "un-tampered" with by myself. Skinny Silicones 12mm width, on the H&R wheel.
- Front foams may be trued down to minimum of 25mm
- No hardening of the foam in any way. Other than leaving them out in open air
Guide
- Stock white H&R guide
- Guide may be shimmed down for maximum depth
Body
- Any 1/24 or 1/25 Scale Car, Truck, or Van. Any kit from Revell, AMT, MPC, Tamiya, etc..........
- The Body must be mounted with the stock H&R mounting kit included with the car. You can omit the velcro tabs and shoe goo the white plastic buttons directly to the body if you wish.
- Interiors are required - Can be Lexan - Must be painted (At least try!) - No Blacked out windows.
- It MUST be a street car........No race cars of any kind.
No body can be wider than 95.25mm, or else there won't be any passing.
The Date - Sunday November 27, 2016
Format - Half Enduro (8 Minute heats) South Loop (The Spring run will be North)
Race Fee - FREE FREE FREE!!!!!!
I have everything you need to build your ride at the store. Including a few new model kits that qualify.
Questions, please ask!
Ron
Race Haven Hobbies
OK, after a long wait I have decided to revamp the "Cargo Nationals" a bit. I am going to open it up to any Street Car/Truck Model of 1/24th or 1/25th Scale sizing. This way if anyone doesn't want to race a truck they do not have to. Here are the Official Rules........
Rules
Chassis
- H&R Inline chassis kit. See HRCH10 for the exact kit
- All stock parts must be used
- Chassis straightening allowed
- Rear bushings can be soldered in (must be in stock location)
- Maximum chassis width is 95mm
Motor
- Handout the morning of the race (same as the kit motor) 18K Stock H&R Hawk 1 (Super Slow and Amazing Fun!)
- All motors will have pinion and wires on them
- Leads will be fed through guide and your braid
pushed in (no guide clips allowed)Tires
- Rears are handout the morning of the race. You will be allowed to use the wheels/tires that came with your kit if they are deemed "un-tampered" with by myself. Skinny Silicones 12mm width, on the H&R wheel.
- Front foams may be trued down to minimum of 25mm
- No hardening of the foam in any way. Other than leaving them out in open air
Guide
- Stock white H&R guide
- Guide may be shimmed down for maximum depth
Body
- Any 1/24 or 1/25 Scale Car, Truck, or Van. Any kit from Revell, AMT, MPC, Tamiya, etc..........
- The Body must be mounted with the stock H&R mounting kit included with the car. You can omit the velcro tabs and shoe goo the white plastic buttons directly to the body if you wish.
- Interiors are required - Can be Lexan - Must be painted (At least try!) - No Blacked out windows.
- It MUST be a street car........No race cars of any kind.
No body can be wider than 95.25mm, or else there won't be any passing.
The Date - Sunday November 27, 2016
Format - Half Enduro (8 Minute heats) South Loop (The Spring run will be North)
Race Fee - FREE FREE FREE!!!!!!
I have everything you need to build your ride at the store. Including a few new model kits that qualify.
Questions, please ask!
Ron
Race Haven Hobbies
Comment