Announcement

Collapse
No announcement yet.

Can I ????????

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Can I ????????

    Question on the chassis for the GT class. I had to shorten the chassis to fit the body I will be using. So I cut the chassis half, took out about 1/4 inch. I used J-B KWIN and lead to put it back together. The parts fit tight together.


    Austin

  • #2
    The main structure of the chassis (as you describe it) is plastic, and the lead would not provide much structural stength, so I would let it pass. It would not pass if it were reinforced with steel wire, brass tubing, or brass plate. I hope you are not relying on the lead to provide much stiffness, given that lead is so soft. Have you thought about reinforcing the joint with a sheet of plastic?

    Comment

    sex vidio
    antalya escort
    lara escort escort istanbul escort sirinevler escort antalya
    beylikduzu eskort bayan taksim eskort lara eskort bayan bakirkoy bayan eskort
    gaziantep escort gaziantep escort
    izmir escort kayseri escort gaziantep rus escort
    replica watches
    kadikoy escort kartal escort
    eurocasino
    brazzers
    Blonde and brunette dirty 3some in semi obscure Профессор трахнул студенту толстым хером pelicula embarazada por accidente
    Working...
    X