Tweet
Here are a few shots of how I reinforced my Buggy. Again, I do not know how to control captioning on SCI so bear with me. If you have any questions I'll be more than happy to try and give you a fair answer.
I added an axle tube to the front and reinforced the front with carbon fiber strips. Added tungsten for additional weight.
Just behind the axle tube is more carbon fiber and tungsten with a brass strip the entire length of the chassis.
At the back, again, carbon fiber and tungsten to help support the bearing uprights.
The washers that are shown on the body mount holes were added to get proper ride height.
I added an axle tube to the front and reinforced the front with carbon fiber strips. Added tungsten for additional weight.
Just behind the axle tube is more carbon fiber and tungsten with a brass strip the entire length of the chassis.
At the back, again, carbon fiber and tungsten to help support the bearing uprights.
The washers that are shown on the body mount holes were added to get proper ride height.
Comment