Missing track piece

[mtrcyclu]

Hi this question is for anyone who uses ultimate racer. I have 2 pieces of scalextric sport track , which I think are part number C8205X. They are an extra long straight and measure 584mm. They came with a scalextric set that I have. They do not show up under ultimate racer’s scalextric sport track. I know they must be able to be added because I have a print out from UR that shows that piece as 584mm. But I am not sure where the print put came from. Anyone know how it can be added to the track library. The help section for this was no help. Thanks

[Scaleracing]

Right now not sold as a seperate piece. Same length as the Power Basetrack in some Sets. It equals 1 full straight C8205 and 3 short straights C8236 as shown in the next post.

The lane changers equal 1 full straight and 1 1/2 straight. Also shown below.

[Scaleracing]

Actually the long straights marked underneath as SA equals one C8205 full straight and 3 short straights C8236. It is not the same as the lane changer I just checked.

image_50607.jpg

The lane change equals 1 full straight and 1 1/2 straight as shown below.

20201111_134116.jpg

[MrFlippant]

They are the same length as one full straight and either one elevated crossover, or three short straights. It's basically a bridge piece that's cheaper to produce.