No announcement yet.

Search Result

51 results in 0.0123 seconds.

  • Florida Dave
    started a topic Velcro for body mount?

    Velcro for body mount?

    I just got an H&R Racing chassis. Also bought a hardbody Pontiac Grand Prix . The chassis came with mounting plastic pointing pins and round Velcro tabs. I m not sure how to use them. All new to me. Could I use strips of Velcro instead? Thanks for any help.
    See more | Go to post

  • Looking for 1/32 Tow / Recovery Truck Like This >>> See Pictures


    Like Formula 1 and most other race tracks around the world, the tow trucks or recovery trucks look like these photos
    below, I can not find any in 1/32 scale, I prefer detailed die cast, the closest ones I can find do not have the recovery
    crane. Help! Advice!...
    See more | Go to post

  • dinglebery
    started a topic Revoslot motor

    Revoslot motor

    Well, I bought this car used, in very good condition, but the motor seems to be failing. Under power it only turns a quarter-turn at a time, kinda sputters and I can see it light up and spark on the inside. it spins freely by hand, like normal. Can someone recommend a contact cleaner for me to try to...
    See more | Go to post

  • Bonez
    started a topic Mounting Old Bodies to Modern Chassis

    Mounting Old Bodies to Modern Chassis

    I am mounting older AFX and TycoPro bodies to modern Viper chassis. This is my first body. Had to remove a lot of material above the motor to get the stance low. Also cut the rear engine/trans/exhaust piece and glued to chassis. Repainted and full decals applied. Looks awesome on my scenic track. I...
    See more | Go to post

  • dw5555
    started a topic 1/24 chips

    1/24 chips

    It just dawned on me when I was posting for a digital chip for a 1/24 car that I've only had 1 chip in all my 1/24 cars that went bad. I've got about equal times (about 5 yrs each) between 1/32 and 1/24 cars. I've replaced at least a dozen or so 1/32 chips back in the day but just 1 on the 1/24 cars....
    See more | Go to post

  • Is there a way to test a Control Unit for proper operation?

    Purchased a replacement Control Unit 30352, was listed as new but packaging was re-tapped and not packed in packaged as new from factory but in original box. My best guess it was returned (for some reason) given a once over and re-sold as new. It does not appear to be used, and basic functions seem...
    See more | Go to post

  • HO RacePro
    started a topic Prrinting in Nylon

    Prrinting in Nylon

    I have just ordered an all-metal hot end for my Ender 3 Pro printer. Said hardware is required for the high temperatures needed to print Nylon. I already have Nylon filament in house.

    I am anxious to try Nylon as a printing material. It is one of the oldest and most versatile of the...
    See more | Go to post

  • Florida Dave
    started a topic Hi all

    Hi all

    Just joined forum. I haven't been slot car racing since the middle 1960's. Have two 1/24 scale cars so far. Am lucky enough to have a commercial track about 20 minutes away. Looking to get back into this hobby in a large way. I sure had a blast when I was much younger.
    See more | Go to post

  • Babydriver
    started a topic Old guy new to slots

    Old guy new to slots

    Retirement amusement has become passion Stumbled into great track set up and now on quest for information on care /maintainence for the variety of cars I now have
    Alan and 132 extremely helpful, I live in the area, and great font of knowledge and willing to share
    intersted in tuning tips
    See more | Go to post

  • Tangmere222
    started a topic Beautiful...


    BRM has done it again.

    See more | Go to post

  • RichD
    started a topic Wiz-Jet


    I was looking for something on the Wizzard site today and saw that the Wiz-Jet Aurora Thunderjet clone chassis was available, so I ordered one. The gear plate, clip and base chassis with the electrics installed is $12. I plan on building a T-Jet SS car....
    See more | Go to post

  • Scaleracing
    started a topic July 4th 2020.

    July 4th 2020.

    Wishing a Happy and Safe 4th of July to all in the United States of America.

    Be well be safe and enjoy your family and friends....
    See more | Go to post

  • Kevan
    started a topic did you end up in this hobby? did you end up in this hobby?

    An interesting thread elsewhere lead me to thinking 'how did I end up in this hobby?' here's a little background covering from then 'til now

    As a kid in the 60's we had manual toys, I loved creating tracks out of wood building blocks and pretending to race my Dinky cars.
    See more | Go to post

  • Kevan
    started a topic Hudy tyre truer drum

    Hudy tyre truer drum

    I've put it off long enough, I've tried a slide on grinder drum and it was OK for a few tyres but bit the bullet tonight and ordered a Ralph Thorne 80 grit 'For Ever' drum for the Hudy

    ...just have to wait now and hope customs don't get their hands on it...
    See more | Go to post

  • Barn Door Motor Speedway - Build Underway!

    Hello Everyone!

    Finally getting around to building the table(s) today for the Barn Door Motor Speedway (one can only spend so much time in the research, design and purchase phases, eh?). Based on some room constraints, I went with a final surface dimension of 132 x 87 inches (335 x 220)....
    See more | Go to post